Kodi 17.6 Krypton is the newest versions of the ever evolving Kodi media center and is now available to install.
It can be installed to an Android TV box as a upgrade or first time install.
Many android TV box users will no doubt like to upgrade to the newest version.
Minimum Android TV box Requirements for Kodi 17.6 Krypton
The Kodi support team does not give exact hardware requirements since it is constantly being updated.
Here is a quote from the wiki supported hardware page.
“It is very hard to generalize Kodi hardware requirements for Linux-based operating-system distributions on ARM or MIPS based embedded systems”
Personally I would not run Kodi 17.6 on anything with 1GB of RAM or any older ARM processors such as the S802.
A unit with 2GB of RAM and a newer S905 or S912 box should have no problems with Kodi 17.6.
The biggest change to requirements is the need for Android 5.0 Lollipop as a minimum, with no more support for older versions.
Be sure your box has Android 5.0 or higher before attempting to install Kodi 17.6
The android version of a box can be found in Settings–>About page.
Things to Watch Before Upgrading a Kodi Android TV Box.
There are many Kodi boxes available with different Firmware and hardware. With the many units available some boxes may have a firmware setting that blocks an install.
Most units will not have a problem upgrading as long as the hardware and software can support it.
… Does it have a hard / soft reset?
Most boxes will have some type of factory default setting.
While most do some do not, but this is a good thing to know just in-case something was to go wrong with an install.
… Upgrading from an Older Kodi Versions
The Kodi support page recommends only updating from 16 Jarvis, and older installs to update to Jarvis first.
Doing a clean install is also possible but all settings will be erased.
… Android 5.0 Lollipop or Higher
Be sure to have at least Android 5.0 Lollipop or Kodi 17.6 will not install.
How To Install Upgrade Kodi 17.6 Krypton to an Android TV Box
In the screenshots and examples below I am using a T95Z Pro android TV box running Kodi 16.1 Jarvis.
The
The first thing to do is to download the Kodi 17.6 APK ARM file.
It can be downloaded from the Google Play Store or from the Kodi site.
It is much easier to use the Play Store since it is automatic but the Kodi Download page can also be used.
Open Google Play Store and type in Kodi or Click Here for Kodi Google Play Store Link
If a version is already installed it may need to be uninstalled first. Very old versions will have an Update button.
Clicking Install or Update will automatically Install the new Kodi 17.6.
Method 2: Manual Download
Manually downloading Kodi from the main site is also easy by opening a Browser such as Chrome, Firefox, or any built in Browser.
Go to the main Kodi download page by Googling it or clicking here for the Kodi Main Download Page.
Scroll down and click were it says Android.
The ARM file to download will depend on your box with 32 bit, and 64 bit options.
Most all boxes will use the ARMV7A (32BIT) version.
If in doubt simply download and try both, as the wrong file will not install and give an error at some point.
The ARM file can also be copied to a Flash drive or SD-Card with a computer and taken to the box.
After it downloads open File Browser inside Apps.
It will be located in the Download Folder.
Clicking the file will begin the installation.
If you are upgrading from an older version the settings usually keep such as add-ons but there is no guarantee.
Kodi support page recommends upgrading only from previous version Kodi 16 Jarvis. If you have a much older Kodi 14 or 15 version, a upgrade to Jarvis may be necessary to keep all the settings.
Of course a clean install can always he done by deleting the old install and simply installing Kodi 17.6.
A clean install will need add-ons setup again but can often be the best method in some scenarios.
After it installs Kodi 17.6 will be ready to run.
If the add-ons get erased, read here for the top Kodi add-ons and how to install them.
Possible Errors and Problems
The possibility for problems during a install can always happen and may be unique to your box or to all android systems.
Here are some errors I ran into while installing Kodi Krypton on a few different boxes.
If the wrong file is downloaded and is tried to install it will give an error “Kodi Not Installed”. This is usually because the system can only run the 32bit or 64bit file.
It will not harm anything to run the wrong file and will simply give an error part way through the install, If this happens use the other ARM file.
Another common error is “There is a Problem Parsing This Package”.
This is a generic error that can be caused by a few things. The main thing is be sure that Install from Unknown Sources is set to ON.
Unknown Sources will be located under Security in Settings.
Some boxes like to give a Parsing Error if the Developer options are set to off.
A MXV box did this and to enable the Developer Options I had to go to the About Page and click the “Build Number” 7 times. Kodi then loaded fine.
Summary
With the new Kodi Krypton now available many will no doubt like to upgrade with most having no problems.
While upgrading is nice keep in mind there is always the potential for something to go wrong.
If you are a technical person you likely will be able to work through most any problem that arises.
If you are not technical and have a older version of Kodi installed, it may be a good idea to wait as long as the current version is working.
Old versions are not compatibe. It aint worth the hassle for a $40 box. Google is going to force you to do what they want. 😈
I have a s912 2G + 16G e0253 android tv box. The system wants to update, but when I download an error message md5sum appears. In the past I was able to by pass the error and content in Home Media Center would still load. Now that content won’t load. Assuming it’s the error code. Could be something else. I run ethernet 179 download speed. When working, content is great. Very small buffing. All of my stories, movies, live tv etc run through Home Media Center. I have un plugged and replugged several times. I’m not Technical or computer literate. Need help. Thanks
I am required to update my leelbox software it won’t let me do it in the update screen
i have a 4k android box Z69 Mbox and it has kdi 17.1 preinstalled and it will not upgrade to 17.6. i have tried everything without success. it will not uninstall. don’t know where to find. pleas help
Have Streamsmart S4 Box. Can’t figure out how to uninstall Kodi and then upgrade Box. Is there someone who can or can tell me how? Really need help on this Box.
I was asked to install a newer version of kodi so I did. Now I don’t have any files in my repository. When I try to down load addons I get to where I put in the key path for media source and then enter name for media source and then click ok and then I get this message
Couldn’t retrieve directory information this could be due to the network not being connected.
So I can’t get any zip files to download so I can unzip files into my repository.
I know my internet is connected and I can go out to the internet and get email and also used it to install the newer version of kodi.
Can you help me so I can get back using kodi on my tickbox.
its because your source is not working anymore or has gone offline. if using kodi krypton try “http://nolimitsbuilds.com/kodi” and install the video plugin listed to enable the wizard. from the wizard i usually get better download speeds from server 4 or 5
i just bought the 96+ pro with 3gb 32 gb memory, and KDMC is loaded on but only 17.4. no matter what i do it will not allow me to upgrade to 17.6. i have tried downloading it from playstore, but it says it is already installed. why wont it allow me to upgrade it? is it because it is in KDMC format and not Kodi?
dont use the settings from the app menu, use the settings on the main page, goto apps, and that where you can remove KD Player and install kodi 17.6
I recently purchsed an android Q box, i was useing remote with showbox and other apps, the mouse does not seem to work, i contacted seller, they said after the 5.1 update the mouse option does not work, which i myself find strange, can anyone varyfi this.
I have a dolamee android box the d5…..i installed Jodi krypton and I’ve been adding the add ones but can’t get the exodus repository or anyone other than kodi to work……what add one are the right ones for regular tv and the new movies
I just updated my Kodi Jarvis 16.1 to Kodi Krypton 17.4. The install went ok but how do I get it to load like before. I mean that before when I loaded Kodi I would get a screen with icons of my apps (I use Exodus) but now I get a screen with a list on the left then I have to click on my videos then choose Exodus. Also the movies and tv shows are listed instead of being shown as icons. Is it possible to have this done? If so I would appreciate any help I can get in doing this. I should mention that I am a novice with this.
Thanks,
Ron
Switch to the old Kodi 16 Jarvis Confluence skin. The new Kodi 17-17.4 uses the Estuary Skin but it is easy to switch to the old Confluence. Read here for how to change skins https://www.wirelesshack.org/top-best-kodi-skins-with-screenshots.html
Thanks JJ.
I went on the site and I re-configured to Confluence and it looks like the one I am accustomed to.
Ron
If you are using kodi 17 just tap left and a side panel will open and change view from list to what one you prefer
To all of you with old out of date boxes,kitkat or below get MyGica media center it will give you krypton17and above works very well !!
I have just installed 17.4 krypton from my old Jarvis 16.1 . All I did was install Kodi in my apps then under browser put in Kodi. Go to Kodi app and install. Click on open and you’ll be running 17.4
Sorry should of said uninstall Kodi in your apps.
Thanks for the guide for upgrading Android TV Box to Kodi 17.4 Krypto.
I am using MXQ 4K Pro Android TV Box and the System Memory – 1GB DDR3.
As you have suggested it is better to have at least 2GB system memory to run smoothly.
Is there any method of upgrading the system memory of MXQ 4K Pro TV Box from 1GB to 2GB?
Waiting for reply
A. S. Bhasker Raj
Bangalore
India
i have D5 dolamee box and when trying to install kodi 17.4 it says x app not installed? can anybody help with this.
I had the same problem so I downloaded it in google play and now when kodi loads it says kodi isn’t responding. Do you want to close it? Report, wait, or okay. I’ve cleared cache and forced stop on kodi and rebooted several times. No luck any help would be greatly appreciated.
I downloaded Kodi 17.5
Hi I had a fire stick and erased everything , so when I put it back on it went to Amazon and wants my bank details , can you tell me what to do please. Regards ken
I have mxq pro 4k model no h_S905x version 6.0.1 kodi 17.4 is already installed with the channels but I don’t know how to open the channels. Another problem is that it recently started switching off. Please how can I correct these two problems. Thanks.
Mike
Thanks
I have HM8 box and I’m having a problem going from 17 to 17.4. The try to delete file and can’t. Doing something wrong. But I think Kodi 17.4 Krypton arm64 v8a 1 apk and kodi 17.4 Krypton armeabi v7a 1 apk is on my File Browser. I just don’t know what to do ! Need help badly, please if someone can help. Thank you very much.
I have a zenoplige mx2 box and When I download kodi it days it’s not capable
I have a qbox trying to upgrade kodi to 17 but keep getting error message x app not installed. Anyone any idea.
Did you ever figure it out? Ours is doing the same thing
delete Kodi 16.1 first then run install again. i got mine to work
ok so when i look to see what version of kodi i have it saya 16.1.. , but if i gomto play store to download 17.1 it says uninstall or open .. just a little lost here exdus has quit and im hoping to get back going soon
I’m having the exact same issues! 🙁
Same problem! Cant find any answers for this problem either.
i need to upgrade the Android firmware , im on 4.2.2 , how can i force an upgrade on my TV?
I have a M8S with 4.4.2. I can’t find a firmware for my box at all yet alone an update can anyone help. Build number
kOT49H 20151023 test-keys
Kernel 3.10.33
tanwei@tanwei #3
Any help i would be very thankful
has anyone successfully downloaded Kodi Krypton?
I have a T8 AML-V2 Amlogic S802 Android box. None of the links on the Kodi site work.
Has anyone found a way around this? Do I need to update the firmware on my box?
Thanks
Jo
You need to download Kodi on your computer and put on an SD card to install on your box.
Every time ninety to install 17.1 krypton it’s get half way then device just crashes any advice ?
yes, else will not uninstall the old version. it had to order install the app for Kodi 17
i have a QBox device 5.1.1 and kodi 16.1. Tryed to update to kodi 17.1 but none of the downloads work, Ive tried Google Play (device not supported) ARMV7A 32bit (wouldnt install) AEMV8a 64bit (wouldnt install) X86 (wouldnt install).
I still have kodi 16.1 installed on the device, do I need to uninstall first?
Yes if all else fails then uninstall the old version first. I had to in order to install Kodi 17.1
How did you install it again?
Hi Chris,
Did you solve this? I have the same set-up, deleted Kodi, tried all the installs and no dice.
Kodi not appearing in Google Play for me.
Very frustrating!
Same thing for me. Did you ever figure out why/how to fix it?
Q Box is AMLogic – its all 32bit Android – use armeabi-v7.apk
nVIDIA Shield is 64bit – use ARMv8A (64bit)
http:// forum.kodi.tv/showthread.php?tid=306204
Kodi also recommends MarshMellow for android stb’s . I have two with Jarvis and MarshMellow but will wait until some bugs get worked out. I have read other forms and they say there maybe trouble with KitKat. so, I guess as Kodi evolves to newer versions, our old STBs will be door stops. I just got rid of a bunch of IKS STBs in SD, everything now is in HD. These Androids and other STBs will be the same way. One will have to upgrade every once in a while to stay up with technology. Which is a good thing!! The Dinosaurs died off too. 🙂 So bottom line is, get the latest STB available every time you upgrade. I suggest everyone go to the Kodi (official) forum and read, read, read.
” https:// kodi.tv/article/we-have-new-website ” Latest Kodi info.
When indigo finally showed up as addonsoon in kodi I installed it and was able to upgrade kodi to 17. Then you will have to add fusion to get most of your others like exodus back and sports devil, etc.
My EM95X will not allow the Kodi update from 16 to 17..
Tried arm32, arm64 and x86 and just get the App not installed message….Looks like 16 it is then..
Hi the only way you can install the new version you have to delete kodi 16.0 or 16.1 which ever you have and then download the new version of kodi 17.1 you will get error saying app not install because you need to delete the older version of kodi unorder to install the new version
how do i delete kodi 16.1 so i can download 17.1?
Settings > More Settings >Apps > (locate Kodi & select Uninstall)
Be sure the UNKNOWN SOURCES in settings is ON. or it won’t load. Kodi is not an official Android app. If that setting is not ON you can forget it!! JailBroken is the same thing. Go to some of the Android forums or Kodi froums and you will learn a lot. Just Google Kodi or Android forums.
Good LUck
Talons
Well from what I just had pop up on my kodi 16 was tvaddons.ag stating that kodi needs updated soon because most media servers are switching too https instead of http so kodi 16 will not work much longer so I guess it time to upgrade to 17 ugh so far it not working for me keeps saying not installed aka fails but just to throw this out there try spmc runs really well same as kodi just slightly different look the devil per was on the kodi team but u need 5.0 or higher
I have kodi 16.0 on a s905 android 5.1 smart tv box. I tried to upgrade kodi and only get a black screen. I’ve uninstalled, cleared cashe, unplugged box from the power. I reinstalled kodi and still black screen. Up to this point I never had a problem updating but updating to the 17 isn’t working. Any suggestions? Will a factory reset cause further problems?
I had been thinking about the upgrade to krypton 17.1 but after reading these i think i will stay with jarvis 16.1. i have the MXQ pro 4k 64 bit hevc H.265 cpu 4core 4k ucd. and it fails to take auto updates.
I got the same thing did you fix the issue?
Kodi 17 does not play 4k videos smoothly, it has problems with 1080p videos as well.
Unfortunately Xtreamer mXV forces to upgrade Kodi to version 17. I can not turn this off. After deleting the new Krypton version, I can install the Jarvis again, but during the next reboot, the mXV installs the Krypton without asking me!
And Kodi v17Krypton is too much for the mXV. The 4K videos are lagging on Krypton using the mXV and some lagging can be seen on the 1080p videos as well. These videos can be played smoothly using Jarvis.
But I’m still looking for the way to prevent the Xtreamer mXV to stop uprading Kodi without my permission.
disable the xtreamer
hi… is there a latest firmware update for m8 android box? is there any site that can be download the new file? Thanks
Good luck with the M8. Mine is toast!!! It’s too out of date. If you want to try here is a website that has all of the firmwares for China built (99% of STB’s are from China) http:// chinagadgetsreviews.com/firmwares.
Go get the latest STB you can find. 64 bit quad core (fastest one you can find) 2 gig. rom and 8-16 gig. storage . OR even higher. In a few years or less these will be obsolete too.
is there anyway to upgrade the version on my android box from 4.4 to 5.0 without using a sc card.